Pneumatic clamping type knife type gate valve

• 

PZ673X series Pneumatic clamping type knife type gate valve After equipped with electromagnetic valv…

A gate is introduced:
PZ673X series?Pneumatic clamping type knife type gate valve?After equipped with electromagnetic valve, proximity switches and other accessories to complete the motion control and the output signal of the opening and closing position, also can complete automatic control of continuous action.?The main use of cast iron, cast steel, stainless steel etc..?The path from DN50 to DN1000.?Pneumatic valves are widely used in chemical, coal, sugar, water, paper and other fields, is an ideal sealing valve.
Second, the main structure and characteristics:
PZ673X series?Pneumatic clamping type knife type gate valve?The left and right valve, U type sealing ring, gate, steel nut, stem, frame, cylinder parts, pneumatic valve by the pneumatic cylinder actuators to complete.?The use of the folder structure, small size, light weight; completely open access, which can prevent the valve dielectric deposition.?The new type U sealing ring, the valve can guarantee a good seal; small flow resistance, easy installation and maintenance.?The gate of the outer seal, is embedded in the body through the flexible seal to achieve, and by means of screws, adjust the plate.
Three,?Pneumatic clamping type knife type gate valve?Standard Specification for:
Design and manufacturing standards:
The structure of standard length: GB/T 12221-2005
Flange standard: GB/T 9113
Pressure temperature rating: GB/T 12224-2005
Test standards: GB/T 13927-2008
Four, pneumatic clamping type knife gate valve technical parameters:
Nominal pressure: 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 150Lb;
Nominal diameter: DN50~500mm NPS 2 "~20";
Suitable temperature: 0~+200 degrees (the specific temperature range as the sealing material and the properties of the media set);
Flange: ANSI B16.5, GB/T9113, JB/T79, HG, SH, JIS, DIN, NF, BS;
Main material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8, CF8M, CF3, CF3M;
Seal type: hard seal, soft seal;
Leakage: Seal: D (liquid level 0.1 * DN mm3/s): a soft seal (zero leakage);
Pneumatic actuator accessories: 1, installation flange 2, solenoid valve 3, air filter;
Air pressure: 0.4~0.6MPa solenoid valve voltage: DC24V, AC220V.
Five, the implementation of standards:

Six, main parts material:

Seven, the main connection dimensions:

Eight, ordering:
1, customers have special requirements for products, must be in the contract to provide the following instructions:
2, the length of the structure, the connection form of nominal diameter, full size, shrinkage, pipe size, and according to the medium temperature and pressure, test, inspection standards and other requirements
3, if the unit has been selected by the design model of our products, please press the model directly to our sales department order;
4, this field according to the special requirements of customers of all kinds of driving device configuration.?If necessary, please contact our technical department.
5, when the occasion is very important, or more complex piping when you try to provide design drawings and detailed parameters by Zhongwei Technology Department audit checks for you.